Can I Add All My Pool Chemicals at Once?
Never mix pool chemicals, and never add all of them at once. Doing so can lead to dangerous chemical reactions and serious injuries. Also, it will make it impossible to [...]
Is Liquid Chlorine the Same As Shock?
Shock and chlorine are different - shock has a more intense chemical composition than regular liquid chlorine sanitisers. Liquid chlorine is used to sanitise pool water, while shock is a [...]
What Two Pool Chemicals Should Not Be Mixed?
It’s critically important to never mix chlorine with muriatic acid or dry acid inside or outside your pool. This mixture can create a dangerous toxic gas that’s harmful if inhaled. [...]
Can You Swim in a Pool Right After Adding Chemicals?
It’s best to wait until chlorine levels reach three ppm before swimming in a pool after adding chemicals. Safe practice is always to test first! Or a good rule of [...]
What Chemicals Are Needed To Winterise a Pool?
Here are the swimming pool chemicals recommended to close your pool for the off-season: pH decreaser lowers the pH level of the water to help stop scaling and staining. Chlorine [...]
Is Algaecide the Same As Shock?
No, algaecide is not the same as shock. Algaecide is specifically designed to prevent and control algae growth in pool water. Algaecide is a preventive measure or a reactive measure [...]
Can I Just Use Shock Instead of Chlorine?
No, you cannot use shock instead of chlorine to sanitise your pool water. Chlorine is the primary sanitiser used to kill harmful bacteria, viruses, and other microorganisms in your pool. [...]
Should You Run Your Pool Pump All the Time?
It's not necessary or efficient to run your pool pump all the time, as this can lead to excessive wear and tear on the equipment and increase energy costs. The [...]
What Are the Costs of Maintaining a Pool?
The exact cost of maintaining a pool varies depending on your local water quality, weather conditions, and pool usage. For more information, read our handy guide, How Much Do Pool [...]
What Pool Chemicals Cannot Be Added at the Same Time?
You should not add certain pool cleaning chemicals simultaneously because they can react and cause dangerous chemical reactions. Here are some examples: Liquid Chlorine and acid (such as muriatic acid [...]
How Do I Store Pool Chemicals Safely?
Knowing How To Store Pool Chemicals correctly is essential for your family's safety. Swimming pool chemicals must be stored in a cool, dry, well-ventilated area, away from direct sunlight, moisture, [...]
What’s a Good Pool Maintenance Schedule?
A regular pool maintenance schedule is necessary to keep your pool in top condition. Here's a suggested schedule: Daily: Check your pool's water level and skim any leaves or debris [...]
What happens if the pH is too low in the pool?
When the pH is lower than 7.2, the chlorine becomes extremely inefficient and is rapidly depleted giving off a strong chlorine smell.
Should I adjust chlorine or pH first?
You should always adjust your pH levels before adding chlorine to the pool. The ideal pH level is between 7.2-7.6 and having a high pH level (above 7.6) will make [...]
How long does it take to balance the chemicals in a pool?
It can take up to 24 hours for the chemicals to balance in a pool.
How often do you balance chemicals in your pool?
You should test your pool weekly during the swimming season and fortnightly during non-swimming season (autumn/winter).
