NEW SUPER-FLOC

Hy-Clor's new Super-Floc formula is a powerful liquid flocculant and clarifier that clears dirt, dust, and dead algae from your pool. It restores clarity overnight by coagulating suspended solids, which are then captured by your filter or settle to the pool floor for easy vacuuming. This product clears cloudy water without raising pH levels, improves filtration, and polishes the water by binding with cloudy materials, making them easy to filter out. It also conditions the filter to enhance the removal of suspended matter, keeping your pool sparkling.

Note: This product will not work effectively if algae are still present. Make sure to super-chlorinate and balance water before using.
Thoroughly brush pool before use.
A vacuum to waste is typically required after use.

Directions for use: 

Key Steps:

1. Shake well before use
2. Backwash / Clean filter
3. Calculate the volume of Hy-Clor Super-Floc required from the table
4. Add Super-Floc to a plastic bucket of water and mix thoroughly
   1. Cartridge Filters: With the filter running, spread diluted mixture across the pool area. Run the filter for at least 8 hours
   2. Sand Filters (or Waste Function) – Requires Vacuum to Waste: Run the filter on recirculate for 2-4 hours. Turn off the pump and allow debris to settle for up to 24-48 hours
5. Backwash / Clean the filter thoroughly
   1. Cartridge Filters: Vacuum the pool and clean as necessary. Run the system until the water is clear, cleaning the filter as needed
   2. Sand Filters: Manually Vacuum the pool to waste
6. Refill the pool to normal water level
7. Resume normal filtration cycle
8. Rebalance the pool