HY-CLOR FLOCCULENT
| Size (Kg) | 2 Kg |
|---|---|
| Pack | Soft Pack |
High potency granular flocculent for muddy, algae infested or severely cloudy pools. For use in pools where the floor of the pool can no longer be seen due to suspended particles or algae in the water.
Ideally used in combination with Super Shock to quickly fix very green or very muddy pools.
Directions for use:
- Not to be used in a pool without a waste option (many cartridge filters do not have a waste function – pH should be above 8ppm)
- Dissolve flocculent into plastic bucket of water at the rate of 400g/10,000L of water
- Turn off the filter and distribute this solution over the entire surface of the pool
- Operate the filter in the bypass or recirculate mode for 30 mins or until the product has dispersed
- Switch off the pump and allow 24 – 48 hours for the flocculent to bind slowly and settle on the bottom of the pool
- Vacuum debris on bottom to waste only – Ensuring that all of the flocculent which has settled on the floor is removed
- If the water is still cloudy with re-settling and then repeat vacuuming as above
- Operate the filter overnight in the normal filtration mode to remove the last traces of flocculent
- The next morning, backwash the filter and rebalance the pool (i.e. alkalinity 80 – 120mg/L and pH 7.2 – 7.6
High potency granular flocculent for muddy, algae infested or severely cloudy pools. For use in pools where the floor of the pool can no longer be seen due to suspended particles or algae in the water.
Ideally used in combination with Super Shock to quickly fix very green or very muddy pools.
