HY-CLOR STAIN REMOVER

HY-CLOR Stain Remover is a concentrated protection for swimming pool surfaces. It works to remove and help prevent stains from algaes, leaves and mould.

Directions for use: 

1. First adjust pH to 7
2. Backwash or clean the pool or spa filter and turn it off
3. Do not swim or filter during this treatment
4. Pool: Add 100g/ 10,000L
5. Spa: Add 100g/5000L
6. Different ways to apply stain remover:
   1.  Apply the product directly onto the affected areas and leave overnight (Not suitable for vinyl liner/ fiberglass pools)
   2. Pour product inside a skimmer sock and place into an affected area and monitor closely
   3. Mix product into a bucket of water and add to the pool via the returns while the system is running
7. For stubborn stains brush the walls and floor after 24 hours – keep the pH at 7 and re-apply if required
8. Once the stains have faded, shock dose with sanitiser and restore pH to between 7.2 – 7.6
9. For weekly maintenance apply 20g / 10,000L
10. Note: Higher than normal chlorine levels will affect this products ability to remove stains, for best results make sure chlorine is below 0.5ppm.