Size (Kg)

4 Kg


Soft Pack

Raises calcium hardness in swimming pools – protecting pool surfaces from etching, protects pool equipment.

Adds shine and sparkle to pool water.

Directions for use: 

Key Steps:

  1. Dissolve calcium increaser in a bucket of water, then distribute around the waters edge with filter running
  2. Adjust pH to between 7.2 – 7.6
  3. Total alkalinity level should be maintained between 80 – 120ppm
  4. If total hardness levels are below 200ppm add calcium increaser according to chart above
  • Protects pool surfaces and equipment from corrosion
  • Add shine and sparkle to pool water
  • Prevents erosion of grout on waterline tiles
  • Protects the lining of concrete pools
  • 100% dissolvable
  • Salt Pools
  • Chlorine Pools
  • Spas
  • All surfaces
  • Above-ground
  • In-Ground
  • Swim-spas
  • Weekly
  • Monthly
  • As needed
To add shine and sparkle to pool water while helping prevent etching of pool floor and surfaces. The ideal calcium reading will vary based on the finishing surface of your pool.