HY-CLOR LIQUID FLOC

Size (L)

1 L

Hy-Clor’s Liquid Floc is a highly charged liquid flocculent which clears dirt, dust and debris to quickly restore clarity to swimming pool water. Hy-Clor Liquid Floc works by coagulating suspended solids in pool water allowing them to settle and vacuumed to waste.

Note: This product will not work effectively if algae are still present. Make sure to super-chlorinate and balance water before using.
Thoroughly brush pool before use.
A vacuum to waste is typically required after use.

Directions for use: 

Key Steps:

  1. Shake well before use
  2. Distribute around the pool and run the pool pump on recirculate for 2 hours
  3. Switch off filtration for 12 – 14 hours or until all sediment has dropped to the pool floor
  4. Once pool is clear with all sediment to waste
  5. If you run out of water, stop the pump and top up with water
  6. Continue vacuuming to waste until all sediment is removed
  7. Backwash and rise filter
  8. Re-test and add balancing chemicals as required

To clarify pool water and boost filter performance: backwash filter and slowly add super-floc at half strength directly to the skimmer basket, with pump running to circulate pool water. Liquid Floc can be used to maintain pool water clarity every 3-4 weeks as required.

  • Extremely fast acting
  • No pre-mixing required, add direct to pool water
  • Won’t cloud pool water
  • Won’t raise pH
  • Salt Pools
  • Chlorine Pools
  • All surfaces
  • Above-ground
  • In-Ground
  • Small pools
  • Swim-spas
  • As required to solve specific pool problem
  • Weekly or monthly in lower dosages as part of a clear-water maintenance program
  • Green Pools
  • Muddy pools
  • Very Cloudy pools